All Geared Head Heavy Duty
Best in Class All Geared Head Heavey Duty Lathe Machine
Particulars | MG-A-66 | MG-A-84 | MG-A-108 | MG-A-120 | MG-A-144 |
---|---|---|---|---|---|
Length Of Bed | 1650mm | 2100mm | 2700mm | 3000mm | 3600mm |
Width Of Bed | 320mm(12 3/4") | ||||
Height Of Center | 250mm (10") | ||||
Between Centre (ABC) | 550mm | 1000mm | 1600mm | 1900mm | 2500mm |
Ind. Hardened Spindle Bore | 53mm (2 1/8") | ||||
Bearing Type | Tapper Roller | ||||
Weight of Machine* | 1850kg.* | 2050kg.* | 2150kg.* | 2250kg.* | 2400kg.* |
Spindle Speeds, Nose & Morse Trapper | 12 Speeds, A2 - 6 & MT - 6 | ||||
Swing over Bed & in Gap | 450mm(18") & 650mm (26") | ||||
Swing over Cross Slide | 275mm | ||||
Cross Slide Size | 254mm X 475mm | ||||
Threads Metric / Inches | 0.5 to 15mm / 2 to 56 TPI | ||||
Tail Stock Spindle Diameter & Travel | 50mm (2") & 175mm (7") | ||||
No. of Feeds / Range Longitudinal | 40 / 0.066 to 2mm / Rev. of Spindle | ||||
No. of Feeds / Range Cross | 40 / 0.0165 to 0.5mm / Rev. of Spindle | ||||
Taper Bore in Tail Stock Spindle | M.T. - 4 | ||||
RPM can be Obtained Low/High | 30/1060 |